Κατασκευή Παραγωγη
Από Την Εταιρεία Μας
Καινούργια Κοντέινερ δεξαμενή
ISO T50 20 ποδιών
για HFA 134a HFA 152a
Εξωτερικές διαστάσεις: 6058x2438x2591mm
Χωρητικότητα: 24.720L
Fortvalve
Δείκτης υγρού Rochester
Καινούργια Τιμή 67000 Ευρώ Με Παράδοση
Ελάχιστη παραγγελία 2x ISO T50 20 ποδιών
Πλήρης κωδικός: 8609 00 10
Τεχνικά Βασικά Στοιχεία για T50 UN Portable Tank
ΠαράμετροςΕνδεικτική Τιμή / ΠροδιαγραφήΧωρητικότητα | 24.000 – 24.600 litres
Διαστάσεις (ISO 20ft frame) | 6.058 mm (L) × 2.438 mm (W) × 2.591 mm (H)
Μέγιστο μικτό βάρος (MGW) | 36.000 kg
Βάρος (tare) | ~7.000 kg
Πίεση σχεδίασης (Design Pressure) | 26–34 bar (ανάλογα με το προϊόν)
Θερμοκρασία σχεδίασης (Design Temperature) | –40 °C έως +65 °C
Υλικό δεξαμενής (Shell Material) | Carbon Steel SA-516 Gr.70 ή Stainless Steel 316L
Κώδικας κατασκευής | ASME VIII Div 1 / 2 ή EN 13445
Πιστοποίηση μεταφοράς | UN T50, RID/ADR, IMDG Code, CSC Plate
Πλαίσιο (frame) | ISO 1496-3, Corten Steel
Επένδυση | Εξωτερική βαφή εποξική ή Insulation + Cladding (PUF Foam, Stainless Sheet)
Αξεσουάρ | Manlid Ø500 mm, Pressure Relief Valve, Bottom Outlet Valve, Thermometer, Sunshield
Παραδοτέα Φάκελου (Technical Documentation Package)
Τεχνικά σχέδια (General Arrangement, Shell Drawing, Piping Diagram).
Material Certificates (EN 10204 3.1).
ASME Calculations.
Welding Procedures & Welder Qualifications.
Inspection & Test Plan (ITP).
Certificates from Classification Society.
Operations & Maintenance Manual.
TECHNICAL SPECIFICATION
Client :
SPECIFICATION NO. : TCF25A.TS/Rev0
DESCRIPTION 24,720 Liters T50 UN Portable Tank
1.00 Technical Characteristics
Tank design code ASME BPVC.Ⅷ.2+IMDG/ADR/RID
US DOT(CFR49) /TIR/ CSC/ UIC/ TC / U2 Stamping.
Type T50 UN Portable Tank
Framework : ISO 1496-3
Size and type code 尺寸与 22K8
1.10 Nominal Capacity 24,720 L
1.20 Tank Mass & Frame Dimensions
MPGM : 34,000 kg
Tare Mass : 7,450 kg
Frame Length×Width×Height
6,058×2,438×2,591 mm1.30 Pressure & Temperature Rating
Vessel Design Reference Temperature (with sunshield) +55 ℃
MDMT : -40 ℃
MAWP（IMDG） : 2.2 MPa
MAWP（USDOT） : 2.0 MPa
External Design Pressure 0.103 MPa
Ambient Temperature Range-40 / +55 ℃
Corrosion allowance1 mm
1.40 Main Material Of Construction
Framework Hollow section : Q355D (GB/T1591)
Vessel : SA-612M N
1.50 NDE (Non Destructive Examination)
According design code
1.60 Post-Weld Heat Treatment
Postweld heat treatment
1.70 Sunshield
2mm thick aluminium sunshield and 40mm minimum from the tank shell, covers the upper third of the tank
shell. 2mm ≥40mm,1/3.
2.00 Finishing
2.10 Vessel
Internal Surface: Shot-blasted to SA 21/2
External Surface: Shot-blasted to SA 21/2 SA 21/2
Baffles
Three sets of surge baffles shall be installed 2.20 Leakage Test and Nitrogen Purge
After cleaning all valves, blind flanges, caps and connected pipes, a leakage test shall be
performed at 1.98 MPa by using clean and dry air. The tank shall be delivered in a Nitrogen purged
condition. the pressure shall be kept at least 0.05MPa.
1.98MPa 0.05MPa
2.30 Painting
The carbon steel frame components and the exterior of the tank are shot-blasted to SA 21/2 and
The total thickness of painting film shall not be less than 120 micron min DFT.
SA 21/2,120DFT.
Frame default color: white:
Tank default color: white:
Remark: The painting color can be selected by customers2.40 Document Holder
1 PVC document holder is provided. The holder is water-resistant and fitted on the rear end of
frame. 2.50 Earth connection
1-off stainless steel lug located at the rear of the tank frame
2.60 Data plates
One sets of stainless steel data plates per tank as per IMDG Code requirements.
3.00 Cabinet
Remarks A steel valve protection cabinet, complete with aluminum alloy door,
houses the gas and liquid line valves, pressure gauge and thermometer.